Last updated on February 1st, 2020 at 05:10 pm
Are you looking for the SeaStar Jack Plate?
The SeaStar Jackplate is, in our opinion, the toughest and sleekest engine Jackplate on the market. This marine performance accessory is essential and allows for higher boat speed, improved fuel economy and also enables your boat to run in more shallow water. The brand new SeaStar Jack Plate offers bold, sleek styling which is redefining the appearance of boat Jackplates.
Key Features include:
- HD Jackplate uses high strength materials
- Capable of handling 350 HP four stroke engines
- 8.5 second rapid hydraulic response
- Complete rigid engine support at full thrust
- Efficiently moves motor at full thrust
SeaStar Hydraulic Jack Plate Models
The SeaStar Hydraulic Jack plate implements high strength materials which allow it to handle most of the strongest boat engines out on the water. The heavy duty (HD) frames can handle four stroke engines rated up to 350 horsepower. They are engineered with durability and speed in mind and the SeaStar HD Jackplate can adjust the boat motor height by 5.8” in about 8.5 seconds. It even works while the boat is cruising at full power.
| HYDRAULIC JACKPLATE | PART NUMBER | CHECK PRICE |
|---|---|---|
| 4” Setback Heavy Duty | JP4040HD | |
| 6” Setback Heavy Duty | JP4060HD | |
| 4” Setback | JP4040 | |
| 6” Setback | JP4060 | |
| 8” Setback | JP4080 | |
| 10” Setback | JP4100 | |
| 12” Setback | JP4120 |
SeaStar Manual Jack Plate Models
SeaStar manual jack plate models are as follows:
| MANUAL JACKPLATE | PART NUMBER | CHECK PRICE |
|---|---|---|
| 4” Setback | JP1040SS | |
| 6” Setback | JP1060SS | |
| 8” Setback | JP1080SS | |
| 10” Setback | JP1100SS |
SeaStar Jack Plate Accessories
There are quite a few SeaStar Jack Plate accessories for sale which will greatly enhance the installation and/or performance of your system. We have a compiled the below list of all of the SeaStar Jackplate accessories.
| Accessories | PART NUMBER | CHECK PRICE |
|---|---|---|
| Basic Rocker Switch | DK4020 | |
| Pro-Trim Single Function | PT1000-1P | |
| Pro-Trim Dual Function | PT2000-1P | |
| SmartStick and Gauge Kit | DK4220 | |
| Gauge and Harness Kit | DK4320 | |
| Accessory Adapter | DK4600 | |
| Hole Shot Plate Kit, 6” | HSP4060 | |
| Hole Shot Plate Kit, 8” | HSP4080 | |
| Hole Shot Plate Kit, 10” | HSP4100 | |
| Hole Shot Plate Kit, 12” | HSP4120 | |
| Jackplate Relay | DK3010 | |
| Jackplate Wire Harness | DK4420 | |
| Actuator Kit, 3/8” Mount Bolt, 5/16” socket | DK4710 | |
| Actuator Kit, 7/16” Mount Bolt, 3/8” socket | DK4720 | |
| SeaStar Stabilizer Clips, (pack of 2) | HYCL-001 | |
| Transom Plate, Small, 2” x 15” | 18-79987 | |
| Transom Plate, Large, 4” x 17” | 18-79988 |
SeaStar Jack Plate Reviews
The most SeaStar jack plate reviews that we could find were on Amazon. Other than those, we could not locate any other SeaStar jack plate reviews online.
SeaStar Jack Plate Troubleshooting
If you are doing some SeaStar Jack Plate troubleshooting, your best bet is to check out SeaStar Solutions FAQ’s on the matter, or the SeaStar jackplate owners manual. You can use these same resources for helping with the SeaStar jack plate installation.
SeaStar Jackplate Price
The SeaStar Jackplate price will vary depending upon which model you buy and where you buy it. We have found that Amazon typically has the best SeaStar Jackplate price out of all of the online retailers that we checked.
Conclusion
Regardless of where you buy your SeaStar Solutions Jackplate, we hope that you have found this page to be a valuable resource for all things relating to your Jackplate. While we obviously fully endorse SeaStar and feel that they offer the best marine products, you might want to also consider jackplates from T-H Marine or Detwiler.
